5 Great reasons to buy from us:
When you think of a modern powder ski, the Atomic Bent Chetler is the first that comes to mind. Generous rocker allows this ski to be an incredible pillow-bashing, powder-slashing ski. With Chris Benchetler's input, it’s a ski that not only floats better in deep snow but also allows you to expand on the possibilities in powder.
Chris is renowned for effortless style in powder, pillows, butters, landing backwards etc. These skis are made for that. However if, like most of us, you tend to just go forward and enjoy making powder 8's with some buddies they provide incredible float and control when the snow is deep.
Atomic have stepped up the game with revolutionary horizontal rocker, 'HRZN Tech' adds 10% more surface area in tip and tail by raising the edge similar to a boat hull. This allows the ski to track through the variable snow with less tip deflection. Its Powder Rocker profile combines the perfect amount of tip and tail turn-up, while the camber underfoot delivers performance when the snow isn't bottomless.
A Light Woodcore build from tip to tail shaves 10% off of the ski's weight while a Full Sidewall and Carbon Backbone add strength and stiffness. There's no skier too skilled for the Bent Chetler 120 for off-piste, heli-skiing or backcountry adventures, it's going to deliver whatever you demand of it. You've never known stoke until you've sent it on the Bent Chetler 120.
With a Carbon Backbone that runs the length of the ski like a stabilising backbone, a Step-Down Sidewall 2.0 for durability and a 120 mm waist for limitless floatation, the Backland Bent Chetler is the ultimate playful tool for your powder missions.
- Dura Cap Sidewall
- Light Woodcore - Poplar Wood balances weight & performance
- Carbon Backbone
- HRZN Tech Tip & Tail - 10% more surface area in Tip & Tail
- Step Down Sidewall 2.0
- Glossy Topsheet
- Powder Rocker 30/40/30
Rocker - Camber - Rocker
Rocker - Camber - Rocker
Advanced - Expert
Advanced - Expert
Length 176 184 192 Tip Width (mm) 142 143 144 Waist Width (mm) 120 120 120 Tail Width (mm) 133 134 135 Radius 18m 19m 20m
Any defective items that are still within the manufacturer’s warranty period will be returned to the manufacturer or their local agent for warranty assessment.
The manufacturer or their local agent has sole discretion in determining whether an item is defective and qualifies for a repair or replacement.
Be sensible – if you slide rails or hit rocks, your skis aren’t going to get replaced.
Chips to the edges of a ski's topsheet & topsheet peeling caused by skiing with your feet close together or banging your skis together on a lift are not covered by warranty.
Contact us with your proof of purchase to begin the process.
Luggage: Please note that luggage warranties specifically refer to manufacturing defects, not damage sustained during travel. For example a tear in the fabric isn't covered, but a burst seam or defective zip is.
Airline policies differ, but generally require you to report damage sustained to your luggage either at the airport or within 1-3 days of your flights in order to receive compensation.
Too big, too small, not stoked on the colour? No worries!
If you are not happy with your product purchased from aussieskier.com you can return, subject to the below conditions, within 30 days of purchasing your item. First step is to lodge an RMA request on our Return Portal
Items marked as Clearance are not eligible for a return. (Under Australian Consumer Law, defective items are not affected by this policy and will be treated as per the above Warranty section)
Return shipping to us is at your own cost.
- The item must be in unused/unworn and in re-saleable condition
- Packaging must be original & undamaged with all stickers/tags etc still attached & factory seal intact.
- Avalanche Safety items are not eligible for returns
- Device must not have been turned on and/or the battery inserted.
- Device must be returned in factory sealed packaging.
- Please note that we cannot accept returns/exchanges on skis that have been mounted.
- Specifically for ski boots we ask you to not mark the soles while trying them on at home, only walk on carpet, boots used on concrete/hard surfaces will be refused a return.
- Any attempt at heat moulding/boot modification will void the eligibility for return.
- Boots that have been heat-moulded or customised in any way in-store can't be returned
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
"THIS PLACE IS AWESOME"
They sorted me out with a new backcountry setup, and couldn't have been more helpful. Answered all my questions about tech bindings and boots. They obviously use the gear, and seriously know their stuff. They tracked down some hard to find items, and then got my gear sorted and in the post the same afternoon I ordered it. So glad I found this place!
- David M
"GREAT SERVICE AND REALLY FRIENDLY"
I'm in Sydney and they're in Melbourne but no problem getting on the phone with my boot size to mount the bindings and very kindly trim the skins for the skis. Shipping was fast and am impressed by their personal service. Thanks guys! Would definitely shop here again.
- Milan S
"20 YEARS OF PAIN, GONE!"
These insoles have fixed my lifelong pain that I've experienced wearing ski boots. Within 2 hours of skiing with these, my body adjusted to them and I have yet to experience any discomfort / pain whilst using these. 2020 is the first year I've returned to Melbourne from skiing pain free! Will recommend to all my friends.
- Brandon F
“EXCELLENT SERVICE AND GREAT PRICE”
I’m very happy with the advice and service i received from Aussieskier before buying my new skis. The staff are super helpful and sent my skis by courier straight away so I had them in time for an overseas trip. The skis arrived in perfect condition with binding attached and exactly as expected. I would definitely buy from Aussieskier again in the future.
- Christina G
- Opens in a new window.