Package the Atomic Vantage 90 Ti W Skis and Warden 11 MNC Bindings and Save!!
The new Atomic Vantage 90 Ti W is a top women’s model in a fully redesigned Vantage ski series – Atomic's lightest, strongest progressive all-mountain series ever. It grips like a high-performance piste ski but is still light and playful. The Vantage 90 Ti W has been a top-selling All Mountain ski for Australian Conditions for us for many years and there is no reason these new ones won't continue the trend.
Atomic have fully re-designed the entire Vantage Series for 2019. Now Featuring Prolite technology the Vantage range is now lighter and stronger than ever. A Slim 'cut-out' portion in the middle of the tip and tail, strips weight and keeps you nimble and in control. The rest of the ski is perfectly balanced, Light Woodcore reinforced with a Titanium Tank Mesh, meaning you can power out of high speed turns with no worries.
- Dimensions: 124.5/90/111
- Lengths: 153cm, 161cm, 169cm
- Radius: 16.5m in 161cm
The Atomic Warden 11 is the perfect combination of lightweight, convenience and performance. The Warden 11 boasts the same U Power Toe as the big brother Warden 13 whilst having a lighter weight, easier to step in heel. An oversized platform provides maximum lateral power transmission from your boot to your ski, no matter what kind of terrain you take it down.
The Warden 11 Brakes come in 90mm and 100mm and fit skis of a similar waist width. We recommend your brakes be slightly larger than the waist of your skis.
New for this year, the Warden 11 come with MNC certification. Meaning you can put any ISO 5355 or ISO 9523 Boots into it safely. This is huge if you have touring boots with rockered soles and has no downsides for normal boots.
- Din Range 3.5 - 11
- Adjustment Range: 32mm
- Weight: 930g per binding
- Brakes Available: 90mm, 100mm
Rocker - Camber
Rocker - Camber
Intermediate - Expert
Intermediate - Expert
Length 153cm 161cm 169cm Tip Width (mm) 123 124.5 126 Waist Width (mm) 90 90 90 Tail Width (mm) 109.5 111 112.5 Radius 15.5m 16.5m 17.6m
Any defective items that are still within the manufacturer’s warranty period will be returned to the manufacturer or their local agent for warranty assessment.
The manufacturer or their local agent has sole discretion in determining whether an item is defective and qualifies for a replacement.
Be sensible – if you slide rails or hit rocks, your skis aren’t going to get replaced.
Chips to the edges of a ski's topsheet & topsheet peeling caused by skiing with your feet close together or banging your skis together on a lift are not covered by warranty.
Luggage: Please note that luggage warranties specifically refer to manufacturing defects, not damage sustained during travel. For example a tear in the fabric isn't covered, but a burst seam or defective zip is.
Airline policies differ, but generally require you to report damage sustained to your luggage either at the airport or within 1-3 days of your flights in order to receive compensation.
Too big, too small, not stoked on the colour? No worries!
If you are not happy with your product purchased from aussieskier.com you can return, subject to the below conditions, within 30 days of purchasing your item. First step is to lodge an RMA request on our Return Portal
Items marked as Clearance are not eligible for a return. (Under Australian Consumer Law, defective items are not affected by this policy and will be treated as per the above Warranty section)
Return shipping to us is at your own cost.
- The item must be in unused/unworn and in re-saleable condition
- Packaging must be original & undamaged with all stickers/tags etc still attached & factory seal intact.
- Avalanche Safety items are not eligible for returns
- Device must not have been turned on and/or the battery inserted.
- Device must be returned in factory sealed packaging.
- Please note that we cannot accept returns/exchanges on skis that have been mounted.
- Specifically for ski boots we ask you to not mark the soles while trying them on at home, only walk on carpet, boots used on concrete/hard surfaces will be refused a return.
- Any attempt at heat moulding/boot modification will void the eligibility for return.